Belt Conveyor for Cement

"Three-step" Strategy to Solve Slipping Problem of Belt Conveyor Used in Cement Plant

Belt conveyor mainly uses friction transmission principle to realize material transportation. Physically speaking, conveyor belt and material are relatively static, wear and tear is small, and noise is small. At the same time, the conveying length can be adjusted according to the production needs. One point feeding and many points feeding can be satisfied, and the flexibility is high. But in the application of belt conveyor in cement plant, slippage is easy to occur. Therefore, we have formulated a "three-step" strategy to solve this problem.

In the front step, increasing the counterweight to solve the slippage problem of the belt conveyor can be increased until the belt does not slip. At the same time, it should be considered that the increased counterweight can not exceed the very large bearing capacity of the belt, so as to ensure the normal service life of the equipment.

The second step is to adjust the tension device and increase the tension between the conveyor belt and the drum. The principle of this method is that when conveying powder materials, the force of the cement belt conveyor is not uniform due to slippage. At this time, it is necessary to reduce the conveyor travel and solve the problem from the source.

Third, timely repair and replacement of parts that are not flexible in operation, especially when the roller shaft is damaged, will cause increased friction resistance and cause slippage. In addition to replacing parts, some rosin powder can be added to the drum. In this process, blower equipment is used to blow in to ensure personal safety.

The main difference between the belt conveyor used in cement plant and the belt conveyor used in other industries is that it mainly uses and conveys powdery materials whose bulk density is less than 1.67/ton/cubic meter. As the requirement for concrete aggregate is constantly increasing, every production link pays special attention to the quality of the material. In the cement production line, the special belt conveyor meets our requirements for temperature, hardness and handling capacity. This is a special design made by the belt conveyor manufacturers of cement plants for the cement industry, which can meet the needs of customers to a greater extent. The application of belt conveyor in cement plant can not only realize the conveying process of powder material from the starting point to the end point, but also complete the transportation of packaged products. At the same time, it can cooperate with other processes in the production process, adjust the conveying direction, conveying distance and installation angle, and realize flexible cement production operation. Today, we summarized the "three-step" solution to the slippage problem of belt conveyor in the application process. If you have similar problems in the production line, I believe this answer can certainly give you some help.