Z Type Belt Conveyor
Z-shaped body, which can transport bulk materials at a large inclination angle- Conveying angle: 0-90° (the best below 70°)
- Belt width: 400-1400mm
- Conveying capacity: 428 cubic meters per hour
- Conveying distance: 203 meters
What is Z type belt conveyor?
The Z type belt conveyor body is "Z" type, which can solve the problem that ordinary belt conveyors are difficult to convey materials at large inclination angles. It is suitable for conveying long and multi-material materials with high height. There are baffles on both sides to ensure that the materials are transported in the bucket. Continuous conveying, not easy to fall, can be used for inclined or vertical conveying of powder and granular materials, and can be smoothly connected with roller conveyors or chain conveyors.
Features and Benefits
1. The material can be conveyed horizontally or obliquely (the inclination angle can reach 90°), the conveying capacity can reach 30~3000 tons/hour, and the length can reach 203 meters
2. Can be used alone or in conjunction with other equipment
Principle of Z Type Belt Conveyor
Technical Parameter
bandwidthB(mm) | 300 | 400 | 500 | 650 | 800 | |||||||||
sidewall height(mm) | 40 | 60 | 60 | 80 | 80 | 120 | 120 | 160 | 120 | 160 | 200 | 240 | ||
Partial conveying inclination conveying amountQ3/h | 30° | 15 | 14 | 20 | 34 | 46 | 71 | 104 | 120 | 128 | 157 | 195 | 235 | |
45° | 11 | 10 | 14 | 26 | 35 | 57 | 83 | 97 | 102 | 127 | 157 | 195 | ||
60° | 8 | 7 | 10 | 18 | 25 | 40 | 58 | 69 | 72 | 90 | 112 | 142 | ||
90° | 4 | 4 | 5 | 10 | 13 | 21 | 31 | 37 | 38 | 48 | 60 | 76 | ||
Dimensions | Head wheel center heightH2/h(MM) | 350-100 | 1100-2000 | 1300-2000 | 1300-2000 | |||||||||
Tail wheel center heightH2/h(MM) | 335 | 330-490 | 600 | 600 | 600-800 | |||||||||
Middle section belt heightH2/h(MM) | 450 | 500-700 | 760-800 | 800-850 | 800-1115 | |||||||||
Middle foot widthB2/h(MM) | 480 | 580 | 870 | 1020 | 1220 | |||||||||
bandwidthB(mm) | 1000 | 1200 | 1400 | |||||||||||
sidewall height(mm) | 120 | 160 | 200 | 240 | 160 | 200 | 240 | 300 | 160 | 200 | 240 | 300 | 400 | |
Partial conveying inclination conveying amountQ3/h | 30° | 172 | 216 | 267 | 327 | 275 | 331 | 419 | 466 | 319 | 395 | 500 | 564 | 794 |
45° | 137 | 175 | 216 | 271 | 222 | 267 | 347 | 384 | 258 | 318 | 414 | 465 | 680 | |
60° | 96 | 124 | 153 | 197 | 158 | 190 | 253 | 178 | 184 | 226 | 302 | 337 | 524 | |
90° | 51 | 66 | 83 | 106 | 85 | 102 | 136 | 149 | 98 | 121 | 162 | 180 | 281 | |
Dimensions | Head wheel center heightH2/h(MM) | 1400-2000 | 1600-2000 | |||||||||||
Tail wheel center heightH2/h(MM) | 600-800 | 800-1000 | 800-1200 | |||||||||||
Middle section belt heightH2/h(MM) | 800-1200 | 1050-1500 | 1050-1700 | |||||||||||
Middle foot widthB2/h(MM) | 1440 | 1690 | 1890 |
Application
Z type belt conveyor can be used to transport bulk and finished materials, such as coal, crushed stone, sand, cement, fertilizer, grain, etc. (material temperature < 60℃, bulk density less than 1.67/ton/m3), it can also transport materials with special requirements, such as: high temperature, materials with acid, alkali, oil or organic solvent and other ingredients, according to the material Use special conveyor belts.