Belt Conveyor System
Horizontal or inclined conveying powder, granular, small block low-abrasive materials and bagged materials (temperature>60℃)
- Conveying capacity: 3000 cubic meters per hour
- Conveying length: 185 meters
- Conveyor belt material: rubber, silicone, PVC, PU, etc.
Belt conveyor system is a traditional belt conveyor system, which can be divided into two types: fixed type and mobile type. It is suitable for continuous or intermittent motion to transport items under 100KG or powder and granular items. It runs at high speed, stable, and low noise. And it can be conveyed up and downhill, with the advantages of strong conveying capacity, long conveying distance, simple structure and easy maintenance.
Features and Benefits
1. It can transport alkaline materials and hot materials with a certain temperature, and can also transport finished items
2. The conveying length can reach 203 meters, and the conveying capacity ranges from 30 to 3000 tons/hour.
3. It can be used as a single conveyor or with other equipment, and the combination is flexible.
4. It can flexibly receive materials from one or more points according to the requirements of the process flow, and can also discharge materials to multiple points or several sections.
5. It has high safety, requires few production personnel, and has less chance of accidents than other modes of transportation. There will be no accidents caused by large pieces of material falling and injuring people or by the malfunction of large and heavy vehicles.
6. Low maintenance cost.
Belt conveyor system principle
The belt conveyor system is a conveyor belt supported by the upper and lower idlers as a bearing member and a traction member, and a conveying machine that bypasses the head and tail rollers to form a closed loop. It transmits power by means of the friction between the driving roller and the conveyor belt. Material delivery. It can be used to convey materials horizontally, inclined upwards and inclined downwards.
Technical parameters
| Carrying roller form | Belt speed (m/s) | Bandwidth (mm) | |||||
| 500 | 650 | 800 | 1000 | 1200 | 1400 | ||
| Conveying capacity G (t/h) | |||||||
| Grooved idler | 0.8 | 78 | 131 | - | - | - | - |
| 1.0 | 97 | 164 | 278 | 435 | 655 | 891 | |
| 1.25 | 122 | 206 | 348 | 544 | 819 | 1115 | |
| 1.6 | 156 | 264 | 445 | 696 | 1048 | 1427 | |
| 2.0 | 191 | 323 | 546 | 853 | 1284 | 1748 | |
| 2.50 | 232 | 391 | 661 | 1033 | 1556 | 2118 | |
| 3.15 | - | - | 824 | 1233 | 1858 | 2528 | |
| 4.0 | - | - | - | - | 2202 | 2996 | |
| Parallel idler | 0.8 | 41 | 67 | 118 | - | - | - |
| 1.0 | 52 | 88 | 147 | 230 | 345 | 469 | |
| 1.25 | 66 | 110 | 184 | 288 | 432 | 588 | |
| 1.6 | 84 | 142 | 236 | 368 | 553 | 753 | |
| 2.0 | 103 | 174 | 289 | 451 | 677 | 922 | |
| 2.5 | 125 | 211 | 350 | 546 | 821 | 1117 | |
| Parallel idler | 10 meters | 15 meters |
| Belt width | 500-800(mm) | 500-800(mm) |
| conveyor belt speed | 0.8～1.6m/s | 0.8～1.6m/s |
| Delivery capacity(V=1.0m/s) | 70～278m3/h | 70～278m3/h |
| Rack Adjustment Inclination | 9°～20° | 9°～20° |
| Conveying large heights | 3910mm | 5700mm |
| Conveying small heights | 2000 | 2700mm |
| tension stroke | 300mm | 300mm |
| Motor Power | 2.2kw～5.5kw | 2.2kw～5.5kw |
| Transmission reduction ratio | 16.6 | 16.6 |
| wire ropeф12-6×19 | 17 meters | 26 meters |
| adhesive tape4(3+1.5) | 22 meters | 31.8 meters |
Belt conveyor system structure
Belt conveyor system is mainly composed of conveyor belt, idler, roller, elastic device and other parts.
Conveyor belt: It has the characteristics of oil, acid and alkali resistance, but it cannot adapt to the change of climate, and it is easy to slip and age.
Idler: ①Users can determine the horizontal position by adjusting the center idler to avoid the deviation of the material during the conveying process. ②The buffer idler is installed at the receiving place to reduce the impact of the material on the belt and reduce the belt tension. wear.
Roller device: The purpose of the reversing roller is to change the running direction of the tape and increase the wrapping angle of the drive roller, so that the tape forms a closed loop.
Tightening device: Make the conveyor belt reach the necessary tension, which can effectively reduce the possibility of slippage on the driving roller, and ensure that the deflection of the conveyor belt between the idlers is within a normal range.
Application
Belt conveyor system is suitable for metallurgy, electric power, coal, chemical industry, building materials, wharf, grain and other industries. It is used for loading, shipping, transshipment or stacking various bulk materials with a loose density of 500~2500kg/m³ at room temperature. item.
